Teco WPV7/54C, 7.5 HP, 1800 RPM, TEFC, 213TC Frame, 208/230/460 Volt, 3 PH, Stainless Steel Washdown, Round Body C-Face…

$2,589.20

Compare
Category:

Description

FEATURES: — 7.5 HP — 1800 RPM — 208/230/460 Volts @ 60 Hz — 213TC Frame — 91.7 % Full Load Efficiency — 82 % Full Load Power Factor — 18.6 A Full Load Amperage — C-FACE — Totally Enclosed Fan Cooled Enclosure (IP56) (IEEE 45) — Rigid C-Flange and Round Body (footless) C-Face available — EISA Compliant with the NEMA Premium Efficiencies (56 Frame – EPACT only) — Department of Energy Efficiency Certificate #CC002A — Factory New with Manufacturer’s Warranty — 60 Hz – 230/ 460V (Usable on 208V), 50 Hz – 190/ 380V Data Also Provided (1.0 Service Factor) — 1.15 Service Factor – Continuous — Class F Insulation with Phenolic Alkyd Resin Varnish – 2 Dips and Bakes — Class B Temperature Rise — NEMA Design B Torques — Div 2, Group F,C,D; Temp Group T3B — Stainless Steel Frame, End Brackets and Hardware — Stainless Steel Oversized Main Conduit Box welded at F-3 location — 304 Stainless Steel Shaft with Keyway and Key — Bi-Directional Rotation — Two Drain Holes on Bottom of Frame and One in C-Flange — Aluminum Die Cast Squirrel Cage Rotor Construction — Double Sealed Bearings Pre-Packed with MULTEMP SRL Grease — Contact Lip Type Seal on Both Drive End and Non-Drive End — Grounding Terminal Inside Main Box — Etched Nameplate on the Stainless Steel Frame — Speed Ranges: 10:1 VT, 4:1 CT — 9 Leads, with Solderless Lug Terminals — Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200 Volts — Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG1, Part 30.

Additional information

Brand