Description

FEATURES: — 1/2 HP — 3600 RPM — 208/230/460 Volts @ 60 Hz — 56 Frame — 75.5 % Full Load Efficiency — 85 % Full Load Power Factor — 1.46 A Full Load Amperage — Open Drip Proof (IP22) — Available in HoriZontal Foot Mounted or JP/JM Frame Configurations — Meets or Exceeds EISA Requirements — Department of Energy Efficiency Certification #CC002A — Factory New with Manufacturer’s Warranty — Also usable on 200 and 208 volts — 1.15 Service Factor – Continuous (1.0 when operated with a VFD) — Class F Insulation with Phenolic Alkyd Resin Varnish — Class B Temperature Rise — NEMA Design B Torques — Oversized Main Conduit Box Rotatable in 90 Degree Increments – F1 Mounted. — F2 Available for Frames 180T-280T – EPAct only (NEMA P Frame Not Centered). Call for Details — Bi-Directional Rotation — Rolled Steel Frame and Conduit Box — 1045 Carbon Steel Shaft — Aluminum Die Cast Squirrel Cage Rotor Construction — Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat — Paint Color: ASGA Light Gray – Munsell N5.0, ASGH Blue – Munsell 5PB 3/8 — Double Shielded Bearings Pre-Packed with MULTEMP SRL Grease — Grounding Terminal Inside Main Box — Stainless Steel Nameplate — VFD Rated per NEMA MG1, Part 31, 4.4.2 – Note (3)(4) — Speed Ranges: 20:1 VT, 10:1 CT — 12 Leads – 7.5 HP and Up; 9 Leads for all Others — Motors are UL Recognized, CSA Approved, and CE Marked — Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG1, Part 31.4.4.3. (Part 30 for ASGA and ASGA JP/JM). UL Fire Pump Features — Complies with ANSI/UL 1004-5 “Fire Pump Motors.” Certificate #20120717 – EX6569 — Available Option: Safety Red Epoxy Paint (Factory Modification #M18 – Call for details).