Teco DHP0054, 5 HP, 1800 RPM, ODP, 184T Frame, 208/230/460 Volt, 3 PH, Cast Iron, Premium AC Electric Induction Motor

$473.75

Compare
Category:

Description

FEATURES: — 5 HP — 1800 RPM — 208/230/460 Volts @ 60 Hz — 184T Frame — 89.5 % Full Load Efficiency — 84.5 % Full Load Power Factor — 6.2 A Full Load Amperage — Open Drip Proof Enclosure (IP22 Rating) — NEMA Premium Efficiency — CE Mark on Nameplate — Department of Energy Efficiency Certification #CC002A — Factory New with Manufacturer’s Warranty — 60 Hz – 230/ 460V (Usable on 208V). 150 HP and Larger is 460V Only — Available in 575V – Note (1) — 1.15 Service Factor – Continuous (1.0 when used with a VFD) — Class F Insulation with Phenolic Alkyd Resin Varnish — Class B Temperature Rise — NEMA Design B Torques — Oversized Main Conduit Box Rotatable in 90 Degree Increments – F1 Mounted. F2 Available – Call for details — Bi-Directional Rotation — Cast Iron Frame and End Brackets — Rolled Steel Conduit Box — 1045 Carbon Steel Shaft — Aluminum Die Cast Squirrel Cage Rotor Construction — Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat — Paint Color: Blue Gray – Munsell N5 — Vacuum De-Gassed Regreasable Ball (or Roller) Bearings on Frames 280TS – 5009 Using Polyrex EM Grease — Double Shielded Bearings on Frames 140T-280T Pre-Packed with MULTEMP SRL Grease — Labyrinth Type Metal Flinger on Both Ends for Frames 280TS – 5009 — Cast Iron Inner and Outer Bearing Caps for Frames 280TS – 5009 — Grounding Terminal Inside Main Box — Stainless Steel Nameplate — Inverter Duty Magnet Wire Rated per NEMA MG1, Part 31, 4.4.2 – Note (4) — Speed Ranges: 20:1 VT, 10:1 CT — 9 Leads – 5 HP and Below, 12 Leads – 7.5 HP to 125 HP, 6 Leads – 150 HP and Larger — Motors are UL Recognized, CSA Approved, and CE Marked UL Fire Pump Features — Complies with ANSI/UL 1004-5 “Fire Pump Motors.” Certificate #20120717 – EX6569 — Available Option: Safety Red Epoxy Paint (Factory Modification #M18).

Additional information

Brand